|
Contact
Detecto Command Systems B.V.
Baardmeesweg 39b
3899 XT Zeewolde
The Netherlands
T +31(0)78-6200350
KvK 27219915
|
|
|
Industrial
transmitters
|
ARC
Flex-series
In addition to
the industrial range is the ARC Flex EX and the
ARC Flex JX added to our catalog.
The ARC Flex EX is, as standard available series,
the most universally applicable radio remote
control from our range.
The JX is a joystick version with extensive
configuration options.
Both the EX and the JX meet the PL=d according
to EN ISO 13849 standard.
|
ARC Flex 4EX, 8EX, 12EX
The transmitters consist of 4, 8
and 12 button double-stage
design.
The transmitters are
ergonomically designed, rugged
but yet compact and lightweight.
The enclosure is IP66 made of a
nylon/fiberglass composite
material, which makes the
transmitter highly impact
resistant.
The rubber obstructing edge
gives an extra protection.
The transmitter comes with a
waist strap and intelligent
charger with optional wall
bracket.
Furthermore, the transmitters
have several configuration
options including master-slave,
tandem and multi-channel systems.
It is also possible to replace
the push buttons by 2- and 3-way
switches.
The most important settings are
stored in a removable I-chip
that easily turns over in
another transmitter and / or
receiver. |
 |
|
Depending on the number of
required functions, the set is
provided with a 'Compact' or
'Standard' receiver.
Receivers come standard with 1
meter cable and an internal
antenna.
ARC Flex EX
 flyer ARC Flex EX
|
|
|
|
ARC Flex JX
The JX
transmitter is a flexible remote joystick
control with extensive configuration options.
The JX transmitter is standard equipped with two
dual-axis joysticks with up to 5 steps which can
be limited.
The additional functions in the form of various
push buttons, rocker switches and rotary
switches, can be customized ..
Furthermore, the transmitter has several
configuration options including master-slave,
tandem and multi-channel systems.
The enclosure is IP66 and made of a
nylon/fiberglass composite material, which makes
the transmitter highly impact resistant.
By default, the transmitter is equipped with an
adjustable tilt control.
If the transmitter is held at an angle of 45 °
or more, the system switches itself off.
The display will indicate the status and system
messages.
The transmitter comes with a waist strap and
charger.
Optionally, the system can be equipped with an
infra-red release.
To release, it is required to be in line of
sight with the receiver.
The most important settings are stored in a
removable I-chip that easily turns over in
another transmitter and/or receiver. |
|
|
The receiver has a large number
of output relays, but can also
be equipped with proportional
outputs like 0-10V and/or
4-20mA.
ARC Flex JX
flyer ARC Flex JX
|
|
|
|
|
|
|
